K-Sport Performance Brake Systems, uncompromising racing technology with
official approval and homologation for road service!		  

 
       
  K-Sport Performance Brake Systems are more than just “big brakes.”  They offer
considerable benefits over standard-issue brake components.  When braking, kinetic
energy is reduced through friction and converted into heat. This heat must be absorbed by
the brake discs and released as quickly as possible. 		    
       
  To deal with this problem, K-Sport brake systems use larger brake discs.  With a diameter
of 330 or 356mm and a thickness of 32mm, our brake discs provide enough space for cold
air ducts on the inside of the disc.  This creates more surface area to quickly dissipate
absorbed warm air.  Drilled brake discs are widely available, but some of these are
susceptible to cracking.  We therefore fit slotted brake discs.  The grooves on the discs
clean the pad surface and can absorb dirt, water and any gas that has accumulated.
  As a result, all of these measures achieve a fade-free deceleration even when the brake
system is under heavy stress.		    
       
  The Domlager are also available separately, order and execution of available vehicle-
specific Domlager, please see the type list.		    
       
 
  The brake disc is designed in two parts. The cast steel friction ring is screwed with a CNC-milled brake disc pot.  The brake disc pot is CNC-milled from the highest-strength A1 6061 airplane aluminum and finished on its surface with a hard coating to protect against corrosion.  A benefit of this design is its low weight.  Through the use of lightweight materials in this respect, the unsprung, rotating weights can be reduced, which is good for the overall handling of the car. 
   
       
  As a rule, production model brake systems use full floating brake calipers.  These cast iron brake calipers have only one large brake piston on the inside of the caliper.  While they are cheap to assemble, they are also extremely heavy and malleable.  All of these problems must be avoided in sport brake systems.    
       
 
K-Sport brake systems are equipped with multiple pistons that are tightly screwed and made from light A1 6061 aluminum.  They are exceedingly firm, which ensures a clearly defined pressure point on the brake pedal.  Surfaces elaborately finished with glossy Eloxal provide an impressive appearance and improve the dissipation of warmth.  The enormous weight advantage over the production model calipers reduces unsprung masses which benefits the operation of the wheel suspension, whereby handling performance is improved.  The use of multiple brake pistons on either side of the caliper makes it possible to make it a fixed caliper.   
   
  With multiple brake pistons, each individual brake piston can have smaller dimensions, whereby the caliper becomes smaller and fits better under the wheel rim.  K-Sport brake calibers are equipped with so-called “differential bore,” differently-sized, brake pistons.  These measures ensure an evenly distributed wear pattern on the brake pad.     
       
 
  All brake systems are delivered complete with Steelflex brake hoses.  They ensure higher brake pressure, less pedal travel, better brake proportioning and are optimally protected against outside elements such as gravel damage.
   
       
 

Front axle brake systems are equipped with 8-piston brake calipers, brake systems for the back axle with 8-piston calipers.  In this way a prefect brake balance is achieved.  Both systems are available with 330 or 356mm discs.  For the 330mm brake systems, aluminum rims of at least 17 inches must be assembled, while a 356mm system fits under rims with an 18 inch diameter or larger. 


With prices beginning at €1,690.00 (330mm systems) and €2,190.00 (356mm systems) K-Sport Performance Brake Systems offer a cost/performance ratio that cannot be matched by any other manufacturer.

    
         
         
  Features of our K-Sport Brake Systems at a glance:   Scope of Supply:

:

  
         
  available with 330 or 356mm disc diameters   K-Sport Brake Systems are always supplied
  
      complete for one axle  
  two-part brake disc, 32mm thick   One set (2 pieces) of two-part,
 
      slotted and ventilated from the inside brake discs  
  Discs are slotted and ventilated from inside   Two racing orange anodized calipers  
  CNC-milled brake disc pot from A1 6061 airplane aluminum, layered with a hard coating   4 brake pads  
    Hardcoat beschichtet   Two brake caliper adapters  
  Cast steel friction ring available individually, should it need to be replaced   One set of Steelflex brake tubes  
  Fade-free deceleration, exceptional heat dissipation, maximal stability under load   All necessary components  
  CNC-milled aluminum 8-piston calipers in front and 6-piston calipers in the rear   Detailed mounting instructions  
  Calipers finished on the surface with racing orange-colored Eloxal (anodized, notpainted!),
allowing for exceptional protection against corrosion and heat dissipation		      
  Lightweight through the use of light materials, better handling through reduced unsprung
masses		      
  Steelflex brake hoses, with synthetic coating for exact pressure point and perfect
proportioning, included		      
  A brake system can be developed for each automobile—if it doesn’t yet appear on our list,
there is no extra charge!		      
  Unbeatable cost/performance ratio